主办:陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊:1976年

Automobile Applied Technology ›› 2022, Vol. 47 ›› Issue (4): 76-78.DOI: 10.16638/j.cnki.1671-7988.2022.004.018

• Design and Research • Previous Articles    

Talking about the Design Scheme of Dynamic Position Lamp of Automobile Rear Combination Lamp

ZHU Shengkuan1, YU Fubin2   

  1. 1.Yibin Yizhi New Energy Vehicle Technology Co., Ltd.; 2.Zhejiang Tianchong Automotive Lighting Group Co., Ltd.
  • Published:2022-04-27
  • Contact: ZHU Shengkuan

浅谈汽车后组合灯动态位置灯设计方案

朱圣宽 1,俞福斌 2   

  1. 1.宜宾翼智新能源汽车科技有限公司; 2.浙江天翀车灯集团有限公司
  • 通讯作者: 朱圣宽
  • 作者简介:朱圣宽(1981—),男,工程师,主要从事汽车开发 和研究工作。

Abstract: This article mainly discusses the dynamic effects of automotive rear combination lamp position light (LED light source) in application scenarios through design methods and the feasibility of automotive lamp modeling. This function includes position light source, MCU (light source controller) and BCM (body controller). The vehicle body controller and the light source controller drive the position light source under certain conditions, so that the position light source is lit in a certain program. Make the lighting effect of the rear combination lamp more fashionable and smart. I hope that the working principle and logical method of the scheme described by me will provide reference and reference for future design work.

Key words: Automobile lamps; Rear combination lamp assembly; Position lamp; Control logic

摘要: 文章主要论述如何根据法规和汽车灯具造型的可行性,通过设计方法,关注设计要点,实 现汽车后组合灯位置灯(LED 光源)在应用场景的动态效果。此功能包括位置灯光源、MCU(光 源控制器)和 BCM(车身控制器)。所述车身控制器和光源控制器在一定条件下驱动位置灯光源, 使得位置灯光源以一定的程序进行点亮,使得后组合灯的点亮效果更时尚灵动。希望所阐述方案 的工作原理和逻辑方法,为今后的设计工作提供参考和借鉴作用。

关键词: 汽车灯具;后组合灯总成;位置灯;控制逻辑