主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2024, Vol. 49 ›› Issue (8): 135-139.DOI: 10.16638/j.cnki.1671-7988.2024.008.025

• 工艺·材料 • 上一篇    

汽车后视镜概论与设计

赵小群 1，陈 敏 2   

  1. 1.福特汽车工程研究（南京）有限公司；2.南京交通职业技术学院
  • 发布日期:2024-04-24
  • 通讯作者: 赵小群
  • 作者简介:赵小群（1988－），女，工程师，研究方向为汽车零部件设计和开发，E-mail:xiaoqunzhao88@163.com。

Introduction and Design of Automotive Side Mirror

ZHAO Xiaoqun1 , CHEN Min2   

  1. 1.Ford Motor Research&Engineering (Nanjing) Company Limited;2.Nanjing Communications Institute of Technology
  • Published:2024-04-24
  • Contact: ZHAO Xiaoqun

PDF

摘要： 文章介绍了汽车后视镜的组成、材料、安装、性能和实验等基本特性和要求。针对后 视镜在整车开发中的设计风险、装配风险，提出以阶段交付为设计方法，结合后视镜的造型、 周边件的设计、安全法规、整车工程、内部布置、制造装配等相关因素，定义后视镜各阶段 的交付内容，以实现对汽车后视镜概论与设计的总体描述，为整车后视镜工程师优化设计和 规避设计风险提供参考。

关键词: 后视镜组成；性能和实验；设计交付；匹配方式；断面定义

Abstract: This paper introduces the basic characteristics and requirements of automotive side mirror component, material, assembly, performance and experiment. For side mirror design risk and assembly process during automotive development, this paper proposes phased delivery as design method, and defines key delivery content of different phases by considering appearance of side mirror, interface component, safety regulation, vehicle attribute, internal package, assembly process and other factors, to have a general description of side mirror design, providing references about optimized design and avoidance of design risks for mirror design engineers.

Key words: Side mirror composition; Performance and experiment; Design and delivery; Match method; Section definition