主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2025, Vol. 50 ›› Issue (16): 51-55.DOI: 10.16638/j.cnki.1671-7988.2025.016.010

• 测试试验 • 上一篇    

基于有限元法的行人保护头型碰撞试验 相关性分析

刘钢   

  1. 海南科技职业大学
  • 发布日期:2025-08-20
  • 通讯作者: 刘钢
  • 作者简介:刘钢（1982－），男，硕士，教授/正高级工程师，研究方向为新能源汽车性能集成
  • 基金资助:
    海南科技职业大学校级科研资助项目+HKKY2024-ZD-02

Correlation Analysis of Pedestrian Protection Head Shape Collision Test Based on Finite Element Method

LIU Gang   

  1. Hainan Vocational University of Science and Technology
  • Published:2025-08-20
  • Contact: LIU Gang

PDF

摘要： 行人作为交通参与者中的弱势群体，其安全问题备受关注。文章依据欧洲新车评价规 程（E-NCAP）行人保护试验规程，基于有限元法对行人保护头型碰撞进行仿真分析与试验验 证。试验选取了 10 个冲击位置，评估头型碰撞仿真与试验的相关性。结果表明，各冲击位置 的偏差控制在 10%以内，符合 E-NCAP 的要求，大多数冲击位置的仿真值与试验值的偏差范 围在-9.7%至 1.3%之间，仿真与试验表现出较高的一致性，为行人保护设计优化提供了可靠 的数据支持。

关键词: 行人保护；头型碰撞；相关性；加速度；头部损伤值

Abstract: Pedestrian as the vulnerable group among traffic participants, have their safety issues drawing considerable attention. Based on the pedestrian protection test procedures of the European new car assessment programme (E-NCAP), this paper conducts simulation analysis and experimental verification of pedestrian protection headform impact using the finite element method. Ten impact positions are selected for the test to evaluate the correlation between the headform impact simulation and the experiment. The results show that the deviation at each impact position is controlled within 10%, meeting the requirements of E-NCAP. The deviation range between the simulation values and the experimental values at most impact positions is between -9.7% and 1.3%, demonstrating a high consistency between the simulation and the experiment, which provides reliable data support for the optimization of pedestrian protection design.

Key words: pedestrian protection; head shape collision; correlation; acceleration; head injury criterion