主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2025, Vol. 50 ›› Issue (12): 84-89.DOI: 10.16638/j.cnki.1671-7988.2025.012.014

• 设计研究 • 上一篇    

汽车蓝牙钥匙通用标定数据研究

吴德石，刘晓杰*   

  1. 江苏理工学院 电气信息工程学院
  • 发布日期:2025-06-24
  • 通讯作者: 刘晓杰
  • 作者简介:吴德石（1997－），男，硕士研究生，研究方向为机电产品检测与智能控制 通信作者：刘晓杰（1978－），男，博士，教授，研究方向为嵌入式系统应用、智能信息处理与传输

Research on General Calibration Data of Automotive Bluetooth Key

WU Deshi, LIU Xiaojie*   

  1. School of Electrical & Information Engineering, Jiangsu University of Technology
  • Published:2025-06-24
  • Contact: LIU Xiaojie

PDF

摘要： 为解决现有通用标定数据在多参数蓝牙钥匙系统中定位精度差的问题，通过对定位及 标定方案进行改进，提出基于多参数优选融合的汽车蓝牙钥匙通用标定数据计算方法，优化 了标定过程的灵活度，提高了蓝牙钥匙系统通用标定数据的解闭锁性能，提升了未标定机型 的解闭锁距离稳定性。实验结果表明，基于多参数优选融合方法，左解锁距离标准差从 3.78 m 降至 2.80 m，前后平均解锁距离分别提高 63%和 19%，三方向平均闭锁距离分别降低 28%、 10%和 21%，在不同程度上解决了解锁延迟和远距离解闭锁现象，有效提升了未标定机型的 使用体验。

关键词: 蓝牙钥匙；接收信号强度；通用标定数据；参数优选

Abstract: To address the issue of poor positioning accuracy of the existing general calibration data in the multi-parameter bluetooth key system, an improvement is made to the positioning and calibration scheme and a calculation method for general calibration data of automotive bluetooth keys based on multi-parameter optimization fusion is proposed, which optimizes the flexibility of the calibration process, improves the unlocking and locking performance of the general calibration data in the bluetooth key system and enhances the stability of the unlocking and locking distances of uncalibrated models. The experimental results show that based on the multi-parameter optimization fusion method, the standard deviation of the left unlocking distance decreases from 3.78 m to 2.80 m, the average unlocking distances in the front and rear directions are increased by 63% and 19% respectively, the average locking distances in the three directions are reduced by 28%, 10% and 21% respectively, and to varying degrees, the phenomena of unlocking delay and long-distance unlocking and locking are resolved, effectively enhancing the user experience of uncalibrated models

Key words: bluetooth key; received signal strength; general calibration data; parameter optimization