主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2024, Vol. 49 ›› Issue (9): 133-136.DOI: 10.16638/j.cnki.1671-7988.2024.009.025

• 工艺·材料 • 上一篇    

3D 打印技术在车身车间的应用分析

郭海洋   

  1. 上汽通用汽车有限公司 整车制造工程部
  • 发布日期:2024-05-11
  • 通讯作者: 郭海洋
  • 作者简介:郭海洋（1986－），男，硕士，工程师，研究方向为车身制造工艺，E-mail:Haiyang_Guo@SAIC-GM.com。

Application Analysis of 3D Printing Technology in Body Shop

GUO Haiyang   

  1. Department of Vehicle Manufacturing Engineering, SAIC General Motors Limited Company
  • Published:2024-05-11
  • Contact: GUO Haiyang

PDF

摘要： 随着汽车行业竞争的日益加剧，汽车制造成本需要不断优化、制造周期也在不断地压 缩优化。因此，具有高效加工能力、节约成本及轻量化特点的 3D 打印技术在汽车制造中被越 来越多地应用和推广。文章主要对非金属 3D 打印技术在车身车间生产制造中的应用场景进行 了研究，并对其应用特点进行了分析，从而为汽车制造中车身车间 3D 打印技术的应用开发提 供参考。

关键词: 3D 打印技术；车身车间；净成型技术；轻量化

Abstract: Automobile manufacturing costs need to be continuously optimized and the manufacturing cycle is constantly compressed and optimized with the increasing competition in the automotive industry. Therefore, the 3D printing technology with efficient processing capacity, cost saving and lightweight characteristics has been increasingly applied and promoted in automobile manufacturing. This paper mainly studies the application scenarios of non-metallic 3D printing technology in the body shop, and analyzes its application characteristic. It provides a reference for the non–metallic 3D technology application in body shop of automobile manufacturing.

Key words: 3D printing technology; Body shop; Net shaping technology; Lightweight