主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2024, Vol. 49 ›› Issue (4): 44-48.DOI: 10.16638/j.cnki.1671-7988.2024.004.008

• 设计研究 • 上一篇    

飞溅润滑仿真在电驱桥减速器开发中的应用实例

郭 舜 1，龚泉进 2，徐 勇 2，张学冉 2   

  1. 1.江铃汽车股份有限公司；2.江西江铃底盘股份有限公司
  • 发布日期:2024-02-28
  • 通讯作者: 郭 舜
  • 作者简介:郭舜（1975－），男，硕士，工程师，研究方向为汽车质量工程及性能开发，E-mail:sguo1@jmc.com.cn。

Application Example of Splash Lubrication Simulation in the Development of Electrical-axle Gearbox

GUO Shun1 , GONG Quanjin2 , XU Yong2 , ZHANG Xueran2   

  1. 1.Jiangling Motors Company Limited, Nanchang 330001, China; 2.Jiangxi Jiangling Chassis Company Limited, Fuzhou 344000, China
  • Published:2024-02-28
  • Contact: GUO Shun

PDF

摘要： 作为最常见的润滑方式之一，飞溅润滑可对齿轮和轴承起到保护作用，减少齿轮摩擦、 磨损，防止胶合、点蚀，使齿轮和轴承具有更高更好的承载能力。文章介绍了一种应用于电 驱桥减速器开发中的飞溅润滑仿真方法，通过对减速器箱体内飞溅润滑的流动细节进行仿真 分析，获得内部流动状态。同时验证关键位置的油液流量是否满足设计要求，验证轴承齿轮 是否得到充分润滑，验证壳体是否存在泄露风险等。文章所介绍的仿真方法可以为齿轮箱的 润滑设计提供一定的工程指导。

关键词: 电驱桥；飞溅润滑仿真；光滑粒子流体动力学；减速器

Abstract: As one of the most common lubrication methods, splash lubrication can protect gears and bearings, reduce gear friction and wear, prevent scuffing and pitting, and provide higher and better load-bearing capacity for gears and bearings. This paper introduces a splash lubrication simulation method applied to the development of electric-axle gearbox, and by simulating and analyzing the flow details of splash lubrication inside the gearbox, the internal flow state is obtained. At the same time, it is verified whether the oil flow rate at key positions meets the design requirements, whether the bearing gears are fully lubricated, and whether there is a risk of leakage in the casing. The simulation method introduces in this paper can provide certain engineering guidance for the lubrication design of gearbox.

Key words: Electrical-axle; Splash Lubrication simulation; Smoothed particle hydrodynamics; Gearbox