主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2023, Vol. 48 ›› Issue (23): 68-73.DOI: 10.16638/j.cnki.1671-7988.2023.023.013

• 设计研究 • 上一篇    

基于拓扑优化的汽车发动机支架轻量化设计

单科臻 1，王可栋 1,2，刘 超 1，胡雪芳 1，莫彦彬 1   

  1. 1.青岛黄海学院 智能制造学院； 2.青岛理工大学 机械与汽车工程学院
  • 出版日期:2023-12-15 发布日期:2023-12-15
  • 通讯作者: 单科臻
  • 作者简介:单科臻（1993－），男，硕士，讲师，研究方向为汽车轻量化设计，E-mail:969492506@qq.com
  • 基金资助:
    青岛黄海学院科技计划项目（2022KJ09）

Lightweight Design of Automotive Engine Bracket Based on Topology Optimization

SHAN Kezhen1 , WANG Kedong1,2 , LIU Chao1 , HU Xuefang1 , MO Yanbin1   

  1. 1.School of Intelligent Manufacturing, Qingdao Huanghai University; 2.School of Mechanical & Automotive Engineering, Qingdao University of Technology
  • Online:2023-12-15 Published:2023-12-15
  • Contact: SHAN Kezhen

PDF

摘要： 为探究一种基于拓扑优化的汽车发动机支架轻量化设计的新方向，文章创建了汽车发 动机支架的三维模型，分析了零件在实际使用工况下的力学响应并得到了零件的材料冗余区 域。以材料冗余区域为设计域，对汽车发动机支架进行了拓扑优化分析，得到零件在实际使 用工况下的最佳力学传递路径，并完成了轻量化优化模型的重构。通过建立优化模型在实际 使用工况下的有限元分析，验证了优化方案的有效性，为汽车零部件轻量化设计提供了参考。

关键词: 汽车发动机支架；拓扑优化；轻量化设计；有限元仿真

Abstract: To explore a new direction for lightweight design of automotive engine mounts based on topology optimization, 3D modeling is used to create a 3D model of the automotive engine mount. The material redundancy area of the part is obtained by analyzing the mechanical response of the part under actual usage conditions. Taking the material redundancy area as the design domain, a topology optimization analysis is conducted on the automotive engine bracket. The result shows that optimal mechanical transmission path for the part under actual usage conditions, thereby completing the reconstruction of the lightweight optimization model. By establishing an optimization model and conducting finite element analysis under actual operating conditions, the effectiveness of the optimization scheme is verified, and a lightweight design reference for automotive components is provided.

Key words: Automotive engine bracket; Topology optimization; Lightweight design; Finite element simulation