国内外汽车材料多环芳烃管控现状及趋势

doi:10.16638/j.cnki.1671-7988.2022.003.041

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (3): 196-202.DOI: 10.16638/j.cnki.1671-7988.2022.003.041

• 综述 • 上一篇

国内外汽车材料多环芳烃管控现状及趋势

刘小冬 1，赵云霞 1，许天楚 2

1.中汽研汽车检验中心（天津）有限公司； 2.中国汽车技术研究中心有限公司

发布日期:2022-04-12
通讯作者: 刘小冬
作者简介:刘小冬，硕士，工程师，就职于中汽研汽车检验中心（天津）有限公司，研究方向：国内外汽车有害物质研究等。

The Current Management and Control Tendency of Domestic and Overseas PAHs in Automotive Materials

LIU Xiaodong1, ZHAO Yunxia1 , XU Tianchu2

1.CATARC Automotive Test Center (Tianjin) Co., Ltd.; 2.China Automotive Technology and Research Center Co., Ltd.

Published:2022-04-12
Contact: LIU Xiaodong

摘要/Abstract

摘要： 随着汽车产业的不断快速发展，人类健康和环境安全越来越受到重视。多环芳烃是一类致癌物质，部分发达国家和地区早就对汽车材料中的多环芳烃进行管控。作为我国汽车行业禁用物质管控标准，GB 30512 《道路车辆禁用物质要求》将多环芳烃纳入管控范围。文章系统地梳理了国内外汽车材料多环芳烃的检测与管控要求，从前处理提取、净化方式和检测设备进行检测方法的对比分析，以及对国内外标准关于 PAHs 管控物质种类与限值要求进行了对比。国内外汽车材料 PAHs 管控现状的整体汇总对 GB 30512 标准修订中 PAHs 的管控要求提供了参考。

关键词: 汽车材料；PAHs；检测方法；种类与限值要求；管控要求

Abstract: With the rapid development of automobile industry, more and more attention has been paid to human health and environmental safety. Polycyclic aromatic hydrocarbons (PAHs) are a class of carcinogens. PAHs in automotive materials have long been controlled in some developed countries and regions. As the control standard of prohibited substances in China's automobile industry, GB 30512 Requirements for Prohibited Substances on Road Vehicles brings PAHs into control. Detection and control requirements of PAHs in automotive materials at domestic and overseas are reviewed. The detection methods including pre-treatment extraction, purification methods and detection equipments are compared and analyzed. The type and limit requirements of controlled PAHs substances at domestic and overseas are also compared and analyzed. The overall summary of PAHs management and control status of automotive materials at domestic and overseas provides reference for PAHs control requirements in the revision of GB 30512 standard.

Key words: Automotive materials; PAHs; Detection methods; Type and limit requirements; Control requirements

刘小冬. 国内外汽车材料多环芳烃管控现状及趋势[J]. 汽车实用技术, 2022, 47(3): 196-202.

LIU Xiaodong. The Current Management and Control Tendency of Domestic and Overseas PAHs in Automotive Materials[J]. Automobile Applied Technology, 2022, 47(3): 196-202.

参考文献

[ 1 ] 孙硕,王慧娟,应坤,等.气相色谱-质谱法同时测定汽车内饰件中的 18 种多环芳烃[J].汽车工艺与材料 2017(02):52-56. [ 2 ] 刘淑琴,王鹏.环境中的多环芳烃与致癌性[J].环境与健康 1995(09):42-45. [ 3 ] 万云洋,朱迎佳,费佳佳,等,环境中的多环芳烃结构及其危害[J].油气田环境保护 2017,27(6),23-26. [ 4 ] 国家认证认可监督管理委员会.脱模剂中多环芳烃的测定方法:SN/T 1877.1—2007[S].北京:中国标准出版社,2007. [ 5 ] 国家认证认可监督管理委员会.塑料原料及其制品中多环芳烃的测定方法:SN/T 1877.2—2007[S].北京:中国标准出版社,2007. [ 6 ] 国家认证认可监督管理委员会.矿物油中多环芳烃的测定方法:SN/T 1877.3—2007[S].北京:中国标准出版社,2007. [ 7 ] 国家认证认可监督管理委员会.橡胶及其制品中多环芳烃的测定方法:SN/T 1877.4—2007[S].北京:中国标准出版社, 2007. [ 8 ] 国家认证认可监督管理委员会.涂料?油墨及其制品中多环 202 汽车实用技术 2022 年芳烃的测定:SN/T 1877.6—2017[S].北京:中国标准出版社, 2018. [ 9 ] 国家认证认可监督管理委员会.旧轮胎中多环芳烃的测定气相色谱-质谱法:SN/T 1877.7—2010[S].北京:中国标准出版社,2011. [10] 中国纺织工业协会.纺织品多环芳烃的测定:GB/T 28189 —2011[S].北京:中国标准出版社,2012. [11] 中国石油和化学工业联合会.硫化橡胶中多环芳烃含量的测定:GB/T 29614—2013[S].北京:中国标准出版社,2013. [12] 中国石油和化学工业联合会.热塑性弹性体多环芳烃的测定气相色谱-质谱法:GB/T 29616—2013[S].北京:中国标准出版社,2013. [13] 全国电工电子产品与系统的环境标准化技术委员会.电子电气产品中多环芳烃的测定第 1 部分高效液相色谱法: GB/T 29784.1—2013[S].北京:中国标准出版社,2013. [14] 全国电工电子产品与系统的环境标准化技术委员会.电子电气产品中多环芳烃的测定第 2 部分气相色谱-质谱法: GB/T 29784.2—2013[S].北京:中国标准出版社,2013. [15] 中国轻工业联合会.皮革化学试验多环芳烃的测定气相色谱-质谱法:GB/T 36946—2018[S].北京:中国标准出版社, 2018. [16] 国家认证认可监督管理委员会.炭黑中蒽的测定气相色谱- 质谱法:SN/T 4114—2015[S].北京:中国标准出版社,2016. [17] Federal Institute for Occupational Safety and Health. Testing and assessment of polycyclic aromatic hydrocarbons (PAHs) in the course of awarding the GS mark:AfPS GS 2019 01 PAK[S].Germany: 2019. [18] Technical Committee CEN/TC 19"Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin".Determination of Content of Polycyclic Aromatic Hydrocarbons (PAHs) in Extender Oils-Procedure using double LC cleaning and GC/MS analysis:EN 16143: 2013[S].British: BSI Standards Publications,2013. [19] Petroleum products-Determination of content of Benzo (a) pyrene (BaP) and selected polycyclic aromatic hydrocarbons (PAH) in extender oils-Procedure using double LC cleaning and GC/MS analysis: IP 346:1998[S]. [20] Technical Committee ISO/TC 45,Rubber and rubber products, Subcommittee SC 3,Raw materials (including latex) for use in the rubber industry. Rubber-Measurement of the aromaticity of oil in reclaimed rubbers:ISO_TR 16314:2010[S]. Switzerland:BSI Standards Publication,2010. [21] Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 3,Raw materials (including latex) for use in the rubber industry. Rubber-Determination of the aromaticity of oil in vulcanized rubber compounds: ISO 21461:2009 [S]. Switzerland: 2009. [22] Technical Committee ISO/TC 45, Rubber and rubber products, Subcommittee SC 3,Raw materials (including latex) for use in the rubber industry.Rubber-Determination of the aromaticity of oil in vulcanized rubber compounds:ISO 21461:2012 [S].Switzerland:2012. [23] The Board for Technical Work Equipment and Consumer Products(AtAV).Testing and validation of polycyclic aromatic hydrocarbons (PAHs) in the course of GS-mark certification: ZEK 01.4-08[S].Germany:2011. [24] 刘卜瑜.新政策对 PAHs 的管控要求及轮胎绿色发展对橡胶油的影响[J].广东化工 2015,42(8):1-4.

国内外汽车材料多环芳烃管控现状及趋势

The Current Management and Control Tendency of Domestic and Overseas PAHs in Automotive Materials

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics