主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (20): 83-89.DOI: 10.16638/j.cnki.1671-7988.2022.020.018

• 测试试验 • 上一篇    

某轻型客车加速轰鸣问题优化分析

胡显能 1,2，彭 荣 1,2，李 军 1，徐高新 1,2，陈慈龙 1,2，钟秤平 1,2   

  1. 1.江铃汽车股份有限公司；2.江西省汽车噪声与振动实验室
  • 出版日期:2022-10-30 发布日期:2022-10-30
  • 通讯作者: 胡显能
  • 作者简介:胡显能（1993—），男，硕士，工程师，研究方向为汽车噪声振动控制，E-mail:583973155@qq.com。

Optimization Analysis of Light Bus Acceleration Booming

HU Xianneng1,2 , PENG Rong1,2 , LI Jun1 , XU Gaoxin1,2 , CHEN Cilong1,2 , ZHONG Chengping1,2   

  1. 1.Jiangling Auto Company Limited; 2.Jiangxi Vehicle Noise and Vibration Key Lab
  • Online:2022-10-30 Published:2022-10-30
  • Contact: HU Xianneng

PDF

摘要： 针对某轻型客车开发过程中存在加速轰鸣噪声问题，对整车传递路径以及响应进行分 析，确定轰鸣噪声由车身前保横梁的约束模态与发动机二阶激励共振引起。运用计算机辅助 工程（CAE）仿真软件对车身前保横梁进行分析，提出局部加强的优化方案，并结合动力吸 振器弱化问题频率的能量，实现对加速轰鸣问题的优化，基于优化方案进行整车验证。结果 表明，加速过程中轰鸣噪声得到显著的优化，有效提升车内加速噪声的主观感受。

关键词: 轻型客车；加速轰鸣；传递路径分析；车身横梁结构优化；CAE 仿真

Abstract: In view of the acceleration booming problem in the development of a light bus, the transmission path and response of the vehicle were analyzed, and it was determined that the booming noise was caused by the constraint mode of the front retaining beam and the second-order excitation resonance of the engine. Computer aided engineering(CAE) simulation software was used to analyze the front retaining beam, and the optimization scheme of local strengthening was proposed. Combined with the energy of the frequency of weakening problem of dynamic vibration absorber, the optimization of accelerated booming problem was realized. The vehicle was verified based on the optimization scheme, and the results showed that the booming noise was significantly optimized during the acceleration process, which effectively improved the subjective perception of the interior acceleration noise.

Key words: Light bus; Acceleration booming; Transmission path analysis; Structural optimization of body cross member; CAE simulation