主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (20): 58-61.DOI: 10.16638/j.cnki.1671-7988.2022.020.013

• 设计研究 • 上一篇    

某柴油机防护罩有限元模态分析及优化

徐稼航，亓宗磊，袁 帅，郭 鑫   

  1. 潍柴动力股份有限公司 进出口公司
  • 出版日期:2022-10-30 发布日期:2022-10-30
  • 通讯作者: 徐稼航
  • 作者简介:徐稼航（1995—），男，硕士，助理工程师，研究方向为汽车结构仿真，E-mail:jiahangxu09@google.com。

Analysis and Optimization of Finite Element Mode of A Diesel Engine Shield

XU Jiahang, QI Zonglei, YUAN Shuai, GUO Xin   

  1. Import and Export Corporation, Weichai Power Company Limited
  • Online:2022-10-30 Published:2022-10-30
  • Contact: XU Jiahang

PDF

摘要： 为改进船用柴油机防护罩振动过大的问题，文章基于有限元方法对某船用柴油机防护 罩进行结构仿真。采用 Hyper Mesh 完成防护罩的前处理，使用 ABAQUS 对防护罩模态进行 校核。计算结果显示，该船用柴油机防护罩前三阶模态低于发动机额定转速对应激励频率的 1.2 倍，工作时易于发生共振，模态不满足设计要求。分析防护罩模态振型及频率后，对该防 护罩结构进行了优化加强。计算结果表明，优化后的防护罩模态满足设计要求，文章对防护 罩类结构设计具有一定参考意义。

关键词: 柴油机；防护罩；有限元；模态分析；ABAQUS；优化设计

Abstract: In order to improve the vibration problem of marine diesel engine shield, this paper simulates the structure of a marine diesel engine shield based on finite element method. HyperMesh is used to complete the pre-processing of the shield, and ABAQUS is used to check the mode of the shield. The calculation results show that the first three modes of the marine diesel engine shield are less than 1.2 times of the excitation frequency corresponding to the rated speed of the engine, so it is easy to have resonance when working, and the modes do not meet the design requirements. After analyzing the vibration types and frequency of the shield mode, the structure of the shield is optimized and strengthened. The calculation results show that the optimized shield mode meets the design requirements. This paper has some reference significance for the structural design of shields.

Key words: Diesel engine; Shield; Finite element; Mode analysis; ABAQUS; Optimization design