主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (17): 62-67.DOI: 10.16638/j.cnki.1671-7988.2022.017.012

• 设计研究 • 上一篇    

商用车悬架侧倾角刚度的计算与匹配

王 琦，赵化刚，陈文斌，张晓珂，王 敏，樊 飞   

  1. 陕汽集团商用车有限公司
  • 出版日期:2022-09-15 发布日期:2022-09-15
  • 通讯作者: 王 琦
  • 作者简介:王琦（1989—），男，工程师，研究方向为汽车整车设计，E-mail:10132550@sxqc.com。

Calculation and Matching of Rolling Angle Stiffness for Commercial Vehicle Suspension

WANG Qi, ZHAO Huagang, CHEN Wenbin, ZHANG Xiaoke, WANG Min, FAN Fei   

  1. Shaanxi Automobile Group Commercial Vehicle Company Limited
  • Online:2022-09-15 Published:2022-09-15
  • Contact: WANG Qi

PDF

摘要： 文章分析研究商用汽车悬架侧倾角刚度的理论计算与设计匹配方法。详细介绍确定商 用车各类型悬架侧倾中心的方法，分析侧倾力矩的构成与侧倾角刚度的计算方法；讨论侧倾 角刚度与平顺性、操稳性的关系，并重点分析前后悬架侧倾刚度分配对转向不足的影响，提 出商用车前后轴侧倾角刚度分配比例的建议。研究结果可应用于商用汽车悬架的优化设计， 提升车辆行驶性能。

关键词: 悬架系统；侧倾角刚度；侧倾中心；转向不足；商用汽车

Abstract: This paper analyzes the theoretical calculation and design matching method of roll stiffness for commercial vehicle suspension. The method of determining roll center of various types of commercial vehicle suspension is introduced in detail, and the composition of roll moment and calculation method of roll stiffness are analyzed. The relationship between the roll stiffness and the ride comfort and handling stability is discussed. The influence of the roll stiffness distribution of the front and rear suspension on the understeer is analyzed. The proposal of the proportion of the roll stiffness distribution of the front and rear axles of commercial vehicles is made. The results can be applied to the optimal design of commercial vehicle suspension to improve vehicle driving performance.

Key words: Suspension system; Roll stiffness; Roll center; Understeer; Commercial vehicles