主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (14): 37-41.DOI: 10.16638/j.cnki.1671-7988.2022.014.009

• 设计研究 • 上一篇    

碰撞试验检测报告自动生成软件的设计及应用

鲁 俊 1， 魏 懿 2   

  1. 招商局检测车辆技术研究院有限公司
  • 发布日期:2022-09-15
  • 通讯作者: 鲁 俊
  • 作者简介:鲁俊（1989—），男，博士，工程师，研究方向为汽车碰撞测试与评价，E-mail：junlu_auto@163.com。

The Design and Application of Automatic Generation Software for Crash Test Report

LU Jun1, WEI Yi   

  1. 1.China Merchants Testing Vehicle Technology Research Institute Company Limited,2.State Grid Sichuan Electric Power Company Ziyang Power Supply Company,
  • Published:2022-09-15
  • Contact: LU Jun

PDF

摘要： 为解决人工方式在编写检测测试报告时效率低下、错误率较高、耗时较长等问题，文 章通过 MATLAB 程序实现与 Office Word 和 Excel 混合编辑，设计出一个碰撞试验检测报告 自动生成系统，以快速、准确对测试数据进行分析和生成报告。文章首先对 MATLAB 控制 Word 的基本原理进行介绍，然后对软件的系统设计与架构思路进行阐述，最后通过典型的碰 撞试验报告进行了实例展示。应用结果表明，该软件系统可以提高工作效率，缩减记录与报 告撰写时间，提高报告质量。

关键词: 碰撞试验；检测报告；自动生成软件；设计及应用

Abstract: In order to solve the problems of low efficiency, high error rate and long time-consuming when manually completing the test report, this paper mixed editing with Office Word and Excel is realized by MATLAB program, and an automatic generation software system for crash test report is designed to analyze test data and generate reports quickly and accurately. This paper first introduces the basic principle on controlling Word by MATLAB, then elaborates the system design and architecture of the software, and finally shows an example through a typical crash test report. The results show that the software system can improve work efficiency, reduce report editing time and improve report quality.

Key words: Crash test; Test report; Automatic generation software; The design and application