主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (12): 57-60.DOI: 10.16638/j.cnki.1671-7988.2022.012.012

• 设计研究 • 上一篇    

某出口重型载货汽车轮胎偏磨问题分析与解决

黄忠华   

  1. 北汽福田汽车股份有限公司
  • 出版日期:2022-06-30 发布日期:2022-06-30
  • 通讯作者: 黄忠华
  • 作者简介:黄忠华（1985—），男，高级工程师，研究方向为出口产品质量改进，E-mail：liuxiuying4457102@163.com。

Analysis and Solution of Eccentric Tire Wear of an Export Heavy Truck

HUANG Zhonghua   

  1. Beiqi Foton Motor Company Limited
  • Online:2022-06-30 Published:2022-06-30
  • Contact: HUANG Zhonghua

PDF

摘要： 某重型载货汽车首次出口到赞比亚市场后出现批量轮胎偏磨故障，大幅缩短轮胎使用 寿命，增加用车成本，客户抱怨强烈。从轮胎偏磨故障发生机理出发，识别影响因素，确定 要因，制定最优方案，最终排除故障，同时总结出一套轮胎偏磨故障的设计预防及过程控制 方法，旨在指导后续产品开发。

关键词: 重型载货汽车；出口产品；轮胎偏磨；故障发生机理及预防

Abstract: After a heavy truck was exported to Zambia for the first time, a batch of tire eccentric wear failure occurred, which greatly shortened the service life of tires and increased the cost of vehicle use, and the customer complained strongly. Starting from the occurrence mechanism of tire eccentric wear fault, this paper identifies the influencing factors, determines the important cause, makes the optimal plan, finally eliminates the fault, and summarizes a set of tire eccentric wear fault design prevention and process control methods, designed to guide subsequent product development.

Key words: Heavy truck; Export product; Eccentric tire wear; Failure occurrence mechanism and prevention