主办:陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊:1976年

汽车实用技术 ›› 2021, Vol. 46 ›› Issue (16): 91-94.DOI: 10.16638/j.cnki.1671-7988.2021.016.025

• 测试试验 • 上一篇    下一篇

基于有限元技术的某车用发电机分析

钱宇晨 1,曹若旸 1,张留铭 1,李长玉 2*   

  1. 1.广州城市理工学院,2.华南理工大学广州学院
  • 出版日期:2021-08-30 发布日期:2021-08-30
  • 通讯作者: 钱宇晨
  • 作者简介:钱宇晨,就读于广州城市理工学院,研究方向:电动机 仿真及静力分析方向。通讯作者:李长玉(1981—),博士,华南理 工大学广州学院副教授,目前主要研究方向为振动与噪声控制等。
  • 基金资助:
    基金项目:广东省特色创新项目(自然科学类)(2017KTSCX218)。

Analysis of a Vehicle Generator Based on Finite Element Technology

GAO Chan, ZHU Weiyu   

  1. 1.Guangzhou City Institute of Technology, 2.Guangzhou University, South China University of Technology
  • Online:2021-08-30 Published:2021-08-30
  • Contact: QIAN Yuchen

摘要: 文章利用有限元分析法分析具有永磁体的交流发电机,通过仿真软件中的静态结构分析,旋转机械,磁接口模拟电动机和发电机这样的旋转机械。以车用三维发电机模型为例,当转子的转速达到 1 000 转时,得到该安全系数在需用安全系数内,之后通过模拟材料参数,旋转速度和绕组的匝数对发电机产生感应电压的影响,发现线圈长度倍增因子与定子线圈总感应电压呈一定关系。

关键词: 有限元法;静态结构分析;线圈长度倍增因子与定子线圈总感应电压的关系

Abstract: This paper uses the finite element analysis method to analyze the alternator with permanent magnets, and simulates rotating machinery such as motors and generators through static structure analysis in simulation software, rotating machinery, and magnetic interfaces. Take the vehicle-use three-dimensional generator model as an example. When the rotor speed reaches 1 000 rpm, the safety factor is obtained within the required safety factor. After that, the material parameters, the rotation speed and the number of turns of the winding are used to generate the induced voltage on the generator. It is found that the coil length multiplication factor has a certain relationship with the total induced voltage of the stator coil.

Key words: Finite element method; Static structure analysis; Coil length multiplication factor and the total induced voltage in the stator winding