| [ 1 ] 杨海洋.鼓式仿生制动器抗磨损性能匹配研究[D].
长春:吉林大学,2022.
[ 2 ] SHANG F,ZHOU H X,QIAO B,et al.Application of
Metal Powder Metallurgy Technology in Prepartion of
Friction Materials of the Railway Vehicles[J].Advanced
Materials Research,2011,287:2987-2990.
[ 3 ] KUMAR M,BOIDIN X,DESPLANQUES Y,et al.Influence of Various Metallic Fillers in Friction Materials
on Hot-spot Appearance during Stop Braking[J].Wear,
2011,270(5/6):371-381.
[ 4 ] HASCH J.Millimeter-wave Technology for Automotive
Radar Sensors in the 77 GHz Frequency Band[J].IEEE
Transactions on Microwave Theory and Techniques,
2012,60(3):845-860.
[ 5 ] 黎小辉,万霞,甘春雷.汽车制动材料研究现状与发展
趋势[J].材料研究与应用,2020,14(3):240-245.
[ 6 ] 唐明.温度对汽车制动材料摩擦学性能影响研究[D].
福州:福州大学,2022.
[ 7 ] 葛志德,胡以强.含竹炭摩擦材料在高压下的摩磨损
性能[J].润滑与密封,2021,36(2):76-80.
[ 8 ] 沈鹏飞.树脂基制动材料在特殊工下摩磨损性能研
究[D].福州:福州大学,2021.
[ 9 ] 肖鹏,李专,熊翔,等.不同制动速度下 C/C-SiC-Fe 材料
的摩擦磨损行为及机理[J].中国有色金属学报,2020,
19(6):1044-1048.
[10] ZHANG J Z,XU Y,ZHANG L,et al.Effect of Braking
Speed on Friction and Wear Behaviors of C/C-SiC
Composites[J].International Journal of Applied Ceramic
Technology,2007,4(5):463-469.
[11] 罗迎,杨兆建.磨损面积扩散率对闸瓦磨损寿命的影
响[J].机械设计与制造,2018(11):10-13.
[12] PEI S H,GUO X X,WEI F D.Sequentially Coupled
Thermal-mechanical Analysis of the Brake Disc Used
in Air Disc Brake[J].Advanced Materials Research,
2014,850:245-248.
[13] GAILIS M,DAINIS B.On Prediction of Motor Vehicle
Brake Pad Wearout[J].Engineering for Rural Development,2021(5): 24-25.
[14] 张明浩,罗庚,曹明宇.汽车用制动器衬片检验质量分
析[J].中国质量技术监督,2017(8):72-74.
[15] 李元孝,张勇亭.汽车用制动器衬片质量安全状况分
析[J].现代制造技术与装备,2016(10):118-119. |
