主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2023, Vol. 48 ›› Issue (19): 156-160.DOI: 10.16638/j.cnki.1671-7988.2023.019.030

• 工艺·材料 • 上一篇    

动力电池箱体 CMT 焊接和结构胶工艺应用

侯少杰   

  1. 北京新能源汽车股份有限公司蓝谷动力系统分公司
  • 出版日期:2023-10-15 发布日期:2023-10-15
  • 通讯作者: 侯少杰
  • 作者简介:侯少杰（1980－），男，硕士，工程师，研究方向为汽车质量，E-mail:benjamin.hou@live.com。

CMT Welding and Structural Adhesive Application for Power-Battery Housing

HOU Shaojie   

  1. Beijing New Energy Vehicle Company Limited Blue Valley Power System Branch
  • Online:2023-10-15 Published:2023-10-15
  • Contact: HOU Shaojie

PDF

摘要： 根据动力电池箱体在项目开发过程中遇到的结构胶粘接机械性能失效问题，文章通过 结合质量分析工具因果图（也称 Ishikawa 图或鱼骨图）以及工艺试验方法，对结构胶应用的 关键工艺参数以及影响因素进行了分析，实现了国内铝合金动力电池箱体采用“冷金属过渡 （CMT）焊接+结构胶”在动力电池箱体的技术应用。

关键词: 动力电池箱体；结构胶；CMT 焊接；鱼骨图

Abstract: Due to the mechanical failure of structural adhesive bonding during the project development process of the extreme fox power battery case. The paper analyzes the key process parameters and factors affecting the application of structural adhesive by combining the quality analysis tool cause and effect diagram (also known as Ishikawa diagram or fishbone diagram) and the validation of process test methods. The key process parameters and influencing factors of structural adhesive application are analyzed. It realizes the technical application of "cold metal transfer (CMT) welding+ structural adhesive" in power battery cases in China.

Key words: Power battery case; Structural adhesive; CMT technology welding; Fishbone diagram