主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2023, Vol. 48 ›› Issue (15): 13-17.DOI: 10.16638/j.cnki.1671-7988.2023.015.003

• 新能源汽车 • 上一篇    

基于轮毂电机的分布式驱动底盘集成设计

段慧清，王 鹏，葛祥旭，雷其会，孔凌志   

  1. 北京理工大学 前沿技术研究院
  • 出版日期:2023-08-15 发布日期:2023-08-15
  • 通讯作者: 段慧清
  • 作者简介:段慧清（1988－），男，硕士，工程师，研究方向为新能源汽车轮毂电机集成设计与测试，E-mail:duanhuiqing @qq.com。

The Integration Design of Distributed Drive Chassis Based on in-wheel Motor

DUAN Huiqing, WANG Peng, GE Xiangxu, LEI Qihui, KONG Lingzhi   

  1. Institute of Advanced Technology, Beijing Institute of Technology
  • Online:2023-08-15 Published:2023-08-15
  • Contact: DUAN Huiqing

PDF

摘要： 针对将中央电机驱动汽车底盘改制成分布式驱动这一要求，首先进行了完整的工程设 计，阐述了整车布置方案，对整车新的制动方案进行了匹配计算。然后将前后轴机械改制设 计成新的前轴转向节和后轴转接盘，并设计模拟工况对零件进行计算机辅助工程（CAE）分 析。此研究为电动汽车改制成轮毂电机驱动的项目总结出了通用设计原则，并提供了流程模 板和工程参考。

关键词: 轮毂电机；分布式驱动；底盘集成

Abstract: Aiming at the requirement of transforming the central motor drive vehicle chassis into a distributed drive, the complete engineering design is carried out first, the vehicle layout scheme is expounded, and the new braking scheme of the vehicle is calculated. Then, the front and rear axles are designed into new steering knuckle and rear-axle adapter, and computer aided engineering (CAE) analysis is carried out on the simulated working conditions. This study summarizes the general design principles for the project of transforming electric vehicle into in wheel motor drive, and provides the process template and engineering reference.

Key words: In-wheel motor; Distributed drive; Integration chassis