主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (23): 5-11.DOI: 10.16638/j.cnki.1671-7988.2022.023.002

• 新能源汽车 • 上一篇    

纯电动重卡用永磁同步电机性能仿真分析

杨 宁，路星星，雷俊鹏，张 超，燕 婷，李峻辉   

  1. 陕西重型汽车有限公司 汽车工程研究院
  • 出版日期:2022-12-15 发布日期:2022-12-15
  • 通讯作者: 杨 宁
  • 作者简介:杨宁（1996—），女，硕士，研究方向为纯电动商用车驱动电机系统开发及应用，E-mail: yangn 1006@163.com。

Analysis on Performance Simulation of Permanent Magnet Synchronous Motor for Pure Electric Heavy Truck

YANG Ning, LU Xingxing, LEI Junpeng, ZHANG Chao, YAN Ting, LI Junhui   

  1. Automotive Engineering Research Institute, Shaanxi Heavy Duty Automobile Company Limited
  • Online:2022-12-15 Published:2022-12-15
  • Contact: YANG Ning

PDF

摘要： 为进一步提高纯电动重卡用永磁同步电机的输出性能，针对所设计的初步电磁方案， 建立 Motor-CAD 电机电磁仿真模型，通过 E-mag 模块与 Terminal 模块进行磁热耦合仿真，并 通过 Lab 模块仿真全工况区域进行磁热耦合仿真，在理论分析的基础上对电机转子磁极结构、 定子齿槽结构以及裂比对输出转矩性能的影响进行了仿真研究，计算了不同电流和不同散热 条件下电机的损耗，最终得出了电机电磁转矩优化措施以及电机损耗规律。

关键词: 纯电动重卡；永磁同步电机；定转子结构；输出转矩；优化措施；电机损耗

Abstract: In order to further improve the output performance of permanent magnet synchronous motor for pure electric heavy truck, the electromagnetic simulation model of Motor-CAD motor was established according to the designed preliminary electromagnetic scheme. The magneto-thermal coupling simulation was carried out through E-mag module and Terminal module, and the whole working condition area was simulated by Lab module. On the basis of theoretical analysis, the influence of the motor rotor pole structure, the stator groove structure and the split ratio on the output torque performance was simulated. The loss of the motor under different currents and different heat dissipation conditions was calculated. Finally, the optimization measures of the motor electromagnetic torque and the motor loss rule were obtained.

Key words: Pure electric heavy truck; Permanent magnet synchronous motor; Stator and rotor structure; Output torque; Optimization measures; Motor loss