主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (16): 36-41.DOI: 10.16638/j.cnki.1671-7988.2022.016.007

• 设计研究 • 上一篇    

轿车前后悬架运动学仿真分析

梅雪晴 1,2，骆 涛*3，万 锐 1,2   

  1. 1.湖北文理学院 纯电动汽车动力系统设计与测试湖北省重点实验室， 2.湖北文理学院 汽车与交通工程学院, 3.观致汽车有限公司 试制试验部
  • 发布日期:2022-09-30
  • 通讯作者: 骆涛
  • 作者简介:梅雪晴（1977—），男，博士，讲师，研究方向为车辆动力学与控制、汽车可靠性工程、车辆热管理技术， E-mail:526655294@qq.com。
  • 基金资助:
    湖北文理学院博士科研基金（2015B003）。

Kinematics Simulation Analysis on Front and Rear Suspension of a Car

MEI Xueqing1,2 , LUO Tao*3 , WAN Rui1,2   

  1. 1.Hubei Key Laboratory of Power System Design and Test for Electrical Vehicle, Hubei University of Arts and Science, 2.School of Automotive and Traffic Engineering, Hubei University of Arts and Science,3.Trial Production and Testing Department, Guanzhi Automobile Limited Company
  • Published:2022-09-30
  • Contact: LUO Tao

PDF

摘要： 轿车行驶过程中车轮随着路面不平度和车速的变化而上下跳动，车轮通过摆臂带动悬 架其他构件运动，并使这些构件发生相应的变形。为分析悬架构件的运动变形对不同车轮定 位参数的影响，根据某轿车前后悬架以及其他主要总成的结构尺寸和特点，运用多体动力学 软件 Adams 建立某轿车整车多刚体动力学模型，并对部分悬架导向元件进行柔性化处理，从 而建立整车刚柔耦合模型。随后进行悬架运动学仿真，得到车轮定位参数的仿真变化曲线， 并与运动学参数实际测试曲线作对比分析，发现整车刚柔耦合模型运动学仿真结果更接近实 际测试曲线。仿真分析结果可以为轿车悬架系统设计与选型提供一定的参考。

关键词: 整车模型；汽车悬架；刚柔耦合；运动学特性

Abstract: In the course of a car the wheels jump up and down with the change of road roughness and speed, the wheel drives the other components of the suspension through the arm and causes the corresponding deformation of these components. In order to analyze the influence of suspension component motion deformation on different wheel alignment parameters, according to a car front and rear suspension and other main assembly structure size and characteristics, the multi-body dynamics software Adams was used to build Multi-rigid-body dynamics model of a car. The rigid-flexible coupling model was established by the flexible treatment of some steering elements of suspension. The suspension kinematics simulation was carried out, and the simulation changing curve of wheel alignment parameters was obtained. The results were compared with the test curves of actual kinematic parameters, and it was found that the kinematics simulation results of the rigid-flexible coupling model were more close to the actual test curve. The simulation results can provide a reference for the design and selection of car suspension system.

Key words: Full vehicle model; Automotive suspension; Rigid-flexible coupling; Kinematic characteristics