汽车通过噪声声源识别方法研究进展

doi:10.16638/j.cnki.1671-7988.2022.008.039

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (8): 205-209.DOI: 10.16638/j.cnki.1671-7988.2022.008.039

• 综述 • 上一篇

汽车通过噪声声源识别方法研究进展

张鑫，沈林邦，王子龙，叶方标

招商局检测车辆技术研究院有限公司国家客车质量监督检验中心

出版日期:2022-04-30 发布日期:2022-04-30
通讯作者: 张鑫
作者简介:张鑫（1995—），男，工程师，研究方向为整车测试与研究，E-mail:cjzhangxin@cmhk.com。
基金资助:
重庆市自然科学基金面上项目（cstc2020jcyj-msxm2900）；招商局检测车辆技术研究院有限公司科技发展基金项目（20AKC27）。

Research Progress of Vehicle Pass-by Noise Sound Source Identification Methods

ZHANG Xin, SHENG Linbang, WANG Zilong, YE Fangbiao

National Bus Quality Supervision & Inspection Center, China Merchants Testing Certification Vehicle Technology Research Institute Company Limited,

Online:2022-04-30 Published:2022-04-30
Contact: ZHANG Xin

摘要/Abstract

摘要： 汽车通过噪声具有频带范围宽、随车速变化快、来源众多、产生机理复杂等特点。基于麦克风阵列的波束形成和声全息方法及基于“源－路径－响应”的传递路径分析方法适合于汽车通过噪声这类非稳态工况的噪声源识别。文章概述三种方法在汽车通过噪声识别领域的发展历程及应用情况，分析其特点，最后展望其发展方向，为高效准确识别汽车通过噪声源提供参考。

关键词: 汽车通过噪声；声源识别；波束形成；声全息；传递路径分析；研究进展

Abstract: Vehicle pass-by noise has the characteristics of wide frequency band, varying with speed, numerous sources and complex mechanism. The beam forming and acoustic holography method based on microphone array and the transfer path analysis method based on "source-path-response" are suitable for the identification of noise sources in unsteady conditions such as vehicle pass-by noise. The development and application of the three methods are summarized in the field of the vehicle pass-by noise. Their characteristics are analyzed respectively. Finally, the development direction of the vehicle pass-by noise sources identification are expected, which provides a reference for the effective and accurate identification of vehicle pass-by noise sources.

Key words: Vehicle pass-by noise; Source identification; Beam forming; Acoustic holography; Transfer path analysis; Research progress

张鑫. 汽车通过噪声声源识别方法研究进展[J]. 汽车实用技术, 2022, 47(8): 205-209.

ZHANG Xin. Research Progress of Vehicle Pass-by Noise Sound Source Identification Methods[J]. Automobile Applied Technology, 2022, 47(8): 205-209.

参考文献

[ 1 ] 褚志刚,杨洋,倪计民,等.波束形成声源识别技术研究进展[J].声学技术,2013,32(5):430-435. [ 2 ] 杨殿阁,何长伟,王子腾.基于时域非简化模型的运动声源定量测量方法[J].清华大学学报（自然科学版）, 2013,53(4):562-566. [ 3 ] 郭荣,裘剡,房怀庆,等.频域传递路径分析方法(TPA) 的研究进展[J].振动与冲击,2013,32(13):49-55. [ 4 ] SIJTSMA P,OERLEMANS S,HOLTHUSEN H. Location of Rotating Sources by Phased Array Measurements[C]//The 7th AIAA/CEAS Aeroacoustics Conference.Masstricht:AIAA,2001:2167-2168. [ 5 ] SIJTSMA P, Stoker R W. Determination of Absolute Contributions of Aircraft Noise Components Using Fly-over Array Measurements[C]//The 10th AIAA/ CEAS Aeroacoustics Conference. Masstricht: AIAA, 2004:2958-2959. [ 6 ] DONAVAN P R,RYMER B.Measurement of Vertical Distribution of Truck Noise Sources During Highway Cruise Pass-bys by Acoustic Beam Forming[J].Journal of the Transportation Research Board,2009,2123 (1):145-152. [ 7 ] DONAVAN P R ,RYMER B ,BLAKE W.Localization of Truck Noise Sources under Pass-by Conditions Using Acoustic Beam Forming Methods[J].SAE International Journal of Commercial Vehicles,2009,2(1): 128-137. [ 8 ] GINN K B,NEWTON G.Contribution Analysis in Passby Testing Using Moving Source Beamforming[J]. SAE Technical Papers, 2011:1669. [ 9 ] ZAVALA P A G,ARRUDA J R F, JANSSENS K, et al. Passenger Vehicle Pass-by Noise Test Using Generalized Inverse Beamforming[J]. SAE Technical Papers, 2011:408.[10] 褚志刚,杨洋,王卫东,等.基于波束形成方法的货车车外加速噪声声源识别[J].振动与冲击,2012,31(7): 75-79. [11] PALLAS M A,CHATAGNON R,LELONG J.Noise Emission Assessment of a Hybrid Electric Mid-size Truck[J]. Applied Acoustics, 2014(76):280-290. [12] BALLESTEROS J A,SARRADJ E,FERNANDEZ M D, et al. Noise Source Identification with Beamforming in the Pass-by of a Car[J].Applied Acoustics, 2015(93):106-119. [13] PADOIS T,BERRY A.Application of Acoustic Imaging Techniques on Snowmobile Pass-by Noise[J]. Journal of the Acoustical Society of America,2017, 141(2):134-139. [14] SIJTSMA P.CLEAN Based on Spatial Source Coherence[J]. International Journal of Aeroacoustics, 2007, 6(4):357-374. [15] COUSSON R,LECLèRE Q,PALLAS M A, et al. A Time Domain CLEAN Approach for the Identification of Acoustic Moving Sources[J]. Journal of Sound and Vibration,2019(443):47-62. [16] WILLIAMS E G. Supersonic Acoustic Intensity on Planar Sources[J].Journal of the Acoustical Society of America,1998,104(5):2845-2850. [17] SAKAMOTO I,TANAKA T.Application of Acoustic Holography to Measurement of Noise on an Operating Vehicle[J]. SAE Technical Papers,1998:1-16. [18] KWON H S,KIM Y H. Moving Frame Technique for Planar Acoustic Holography[J].Journal of the Acoustical Society of America,1998,103(4):1734-1741. [19] PARK S H,KIM Y H. An Improved Moving Frame Acoustic Holography for Coherent Band Limited Noise[J].The Journal of the Acoustical Society of America,1998,104(6):3179-3189. [20] 杨殿阁,郑四发,罗禹贡,等.运动声源的声全息识别方法[J].声学学报,2002(4):71-76. [21] 罗禹贡,杨殿阁,郑四发,等.基于近场声全息理论的运动声源动态识别方法[J].声学学报,2004(3):226-230. [22] 高印寒,周晓华,杨开宇,等.基于小波分析的声全息识别运动声源的方法[J].吉林大学学报(工学版),2007, 37(5):1197-1202. [23] YANG D,WANG Z, LI B,et al. Quantitative Measurement of Pass-by Noise Radiated by Vehicles Running at High Speeds[J].Journal of Sound and Vibration, 2011,330(7):1352-1364. [24] YANG D, WANG Z, LI B, et al. Development and Calibration of Acoustic Video Camera System for Moving Vehicles[J]. Journal of Sound and Vibration, 2011(330):2457-2469. [25] YANG D,WEN J,MIAO F, et al. Complete De-Dopplerization and Acoustic Holography for External Noise of a High-speed Train[J]. Journal of the Acoustical Society of America,2016,140(3):1739-1748. [26] EDUARDO B M,GUSTAVO P G. The Use of Experimental Transfer Path Analysis in a Road Vehicle Prototype Having Independent Sources[J].SAE Technical Papers, 2008:555. [27] DEBEER F G,VERHEIJ J W.Experimental Determination of Pass-by Noise Contributions from the Bogies and Superstructure of a Freight Wagon[J]. Journal of Sound and Vibration,2000,231(3):639-652. [28] 郑四发,郝鹏,李西朝,等.车外加速噪声的传递特性模型及声源识别[J].汽车工程,2010,32(5):439-442. [29] 郝鹏,郑四发,连小珉.运动噪声源的时域传递路径模型及贡献率分析[J].机械工程学报,2012,48(8):104- 109. [30] JANSSENS K,BRITTE L,HERMAN V D A, et al. Time-domain Source Contribution Analysis of inroom Pass-by Noise[J]. SAE Technical Papers, 2011: 1609. [31] CHU Z G,WANG H W,CHEN C H, et al. Source Path Contribution Analysis for Vehicle Indoor Pass-by Noise[J].Sound and Vibration,2017,51(9):16-20.

汽车通过噪声声源识别方法研究进展

Research Progress of Vehicle Pass-by Noise Sound Source Identification Methods

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics