主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (8): 80-84.DOI: 10.16638/j.cnki.1671-7988.2022.008.017

• 测试试验 • 上一篇    

CFD 仿真软件在重卡护风罩设计中的应用

殷玉先   

  1. 北汽重型汽车有限公司
  • 出版日期:2022-04-30 发布日期:2022-04-30
  • 通讯作者: 殷玉先
  • 作者简介:殷玉先（1987—），男，研究方向为整车热管理，E-mail:513708074@qq.com。

The Application of CFD Simulation Analysis on Heavy Truck Wind Protecting Shield Design

YIN Yuxian   

  1. BAIC Heavy Truck Company Limited
  • Online:2022-04-30 Published:2022-04-30
  • Contact: YIN Yuxian

PDF

摘要： 文章以国内某重卡冷却模块护风罩为研究对象，利用计算流体学分析软件 STAR CCM+， 采用 K-Omega 湍流模型和多重参考系模型对整车冷却模块、冷却风扇和发动机舱的流畅性进 行模拟分析，在护风罩尺寸不同的情况下，分别得到在发动机扭矩点和功率点两种工况下通 过散热器、中冷器、冷凝器芯体表面的平均风速，然后根据平均风速的仿真结果，选择合适 尺寸的护风罩。

关键词: 发动机；冷却风扇；冷却模块；护风罩；计算流体动力学分析

Abstract: In this paper, the heavy truck cooling module wind protecting shield is studied as an object. Using CFD, STAR and CCM+ software, the standard K-Omega turbulence model and the multiple reference frame model, this paper conducts the simulation analysis for the cooling module, cooling fan and the flowing field of engine compartment. Based on different dimension of wind protecting shield, obtain the surface average air velocity of radiator, charge air cooler, condenser in engine max torque point and max power point. Then choose proper wind protecting shield according to the analysis result of the average air velocity.

Key words: Engine; Cooling fan; Cooling module; Wind protecting shield; Computational fluid dynamics analysis