主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (8): 65-70.DOI: 10.16638/j.cnki.1671-7988.2022.008.014

• 测试试验 • 上一篇    

基于 ADAMS 的某商用载货车舒适性仿真与优化

肖 飞，王 伟，栗广生，冯 哲，叶明松   

  1. 东风柳州汽车有限公司
  • 出版日期:2022-04-30 发布日期:2022-04-30
  • 通讯作者: 肖 飞
  • 作者简介:肖飞（1986—），男，硕士，工程师，主要研究方向为商用车 NVH 仿真与试验，E-mail：531386789@qq.com。
  • 基金资助:
    广西创新驱动发展科技重大专项（AA18242033）；柳州市科技计划项目（2020GAAA0404）。

Comfort Simulation and Optimization of a Commercial Vehicle Based on ADAMS

XIAO Fei, WANG Wei, LI Guangsheng, FENG Zhe, YE Mingsong   

  1. Dongfeng Liuzhou Motor Company Limited
  • Online:2022-04-30 Published:2022-04-30
  • Contact: XIAO Fei

PDF

摘要： 针对某载货车在搓板路、扭曲路等不平路面时驾驶室跳动大，不被驾乘人员所接受的 问题，文章基于该载货车各悬置系统振动传递路径分析结果，得出驾驶室悬置隔振不足是造 成舒适性问题的主要原因。在仿真分析软件 ADAMS 中建立整车模型进行虚拟仿真，并与实 测数据对比验证模型可用于二次开发。利用 MATLAB 软件将驾驶室悬置阻尼力拟合成非线性 模型，利用 ADAMS/View 中的优化工具对其进行优化，优化结果表明舒适性得到明显改善， 并在实车中得到验证，振动性能改善 34.9%。

关键词: 载货车；舒适性；二次开发；悬置系统

Abstract: When a truck is on uneven roads such as washboard road and twisted road, the cab jumps greatly and is not accepted by the drivers and passengers. Based on the results of vibration transfer path analysis of a tractor suspension system, this paper concludes that the lack of cab suspension is the main cause of poor smoothness. Built vehicle model in ADAMS, and verify that the model can be used for secondary development by comparing with the experimental data. The cab suspension damping force is composed of a nonlinear model by MATLAB, and optimize it with ADAMS/View optimization tools. The optimization results show that the comfort has been significantly improved and verified in tractor. The level of vibration decreased by 34.9%.

Key words: Truck; Comfort; Secondary developmen; Suspension system