主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (2): 91-95.DOI: 10.16638/j.cnki.1671-7988.2022.002.021

• 测试试验 • 上一篇    

汽车零部件开档尺寸间隙对扭矩衰减的影响研究

陈 健   

  1. 威马汽车科技集团有限公司
  • 出版日期:2022-01-30 发布日期:2022-01-30
  • 通讯作者: 陈 健
  • 作者简介:陈健，学士，助理工程师，就职于威马汽车科技集团 有限公司，研究方向：乘用车底盘悬架系统。

Research on the Influence of Opening Size of Auto Parts on Torque Attenuation

CHEN Jian   

  1. Weltmeister Motor Technology Co., Ltd.
  • Online:2022-01-30 Published:2022-01-30
  • Contact: CHEN Jian

PDF

摘要： 文章针对汽车底盘常见的紧固结构开档间隙对扭矩衰减的影响进行研究，利用 CAE 技术分 析了开档间隙及开档结构的刚度对扭矩衰减的作用机理。运用 Adams 求解出某车型摆臂与副车架 开档连接结构最大受力工况，分析了在开档间隙存在的情况下最大受力工况开档结构是否会因螺 栓夹紧力不足导致衬套滑移从而产生异响，为开档结构扭矩设置提供了验证思路。

关键词: 开档结构；螺栓夹紧力；扭矩衰减；CAE 分析

Abstract: The influence of opening clearance of common fastening structure on torque attenuation of automobile chassis is studied. The mechanism of opening clearance and stiffness of opening structure on torque attenuation is analyzed by CAE technology.Adams is used to solve the maximum stress condition of swing arm and subframe open-end connection structure of a vehicle, and to analyze whether the maximum stress condition open-end structure will produce abnormal sound due to bushing slip due to insufficient bolt clamping force in the case of open-end clearance, which provides a verification idea for torque setting of open-end structure.

Key words: Open structure; Bolt clamping force; Torque attenuation; CAE analysis