主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2021, Vol. 46 ›› Issue (18): 122-124.DOI: 10.16638/j.cnki.1671-7988.2021.018.034

• 测试试验 • 上一篇    

应用于重型货车的轻量化单层梁车架设计

朱维娜，田志强，赵洋康   

  1. 陕西重型汽车有限公司
  • 出版日期:2021-09-30 发布日期:2021-09-30
  • 通讯作者: 朱维娜
  • 作者简介:朱维娜（1987—），女，就职于陕西重型汽车有限公司， 研究方向：汽车设计。

Lightweight Single-layer Beam Frame Design Applied to Heavy Trucks

ZHU Weina, TIAN Zhiqiang, ZHAO Yangkang   

  1. Shaanxi Heavy-Duty Truck Co., Ltd.
  • Online:2021-09-30 Published:2021-09-30
  • Contact: ZHU Weina

摘要： 随着国家对车辆超载治理力度越来越强大，公路标载运输车辆为了能够提升单趟运输效率，对牵引车轻量 化有迫切需求。车架占据整车自重的很大比例，要全方位实现整车轻量化，也应当策划分析车架的轻量化方案。文 章基于现有标载市场车型的车架结构，在满足其承载及可靠性的基础上对车架内部结构进行了优化。通过 HyperWorks 有限元分析软件，分析优化后车架在不同工况下的受力及安全因子。在满足仿真分析安全系数的前提 下，又进行了整车可靠性试验验证，该结构车架完全满足对应细分市场的工况需求，存在推广价值。

关键词: 轻量化；车架；有限元；安全系数

Abstract: In order to improve the efficiency of single trip transportation, there is an urgent need for tractors to be lightweight. The frame occupies a large proportion of the dead weight of the whole vehicle, so there is still room for optimization of the frame in order to achieve full vehicle lightweight. In this paper, the frame structure is optimized based on the existing frame structure of the market model, and the stiffening plate inside the frame is cancelled on the basis of satisfying its load bearing and reliability. Though the finite element analysis software HyperWorks, the strength changes of the two frame under different working conditions before and after optimization were compared and analyzed. On the premise of satisfying the simulation safety factor, the reliability test of the whole vehicle was carried out. The structure of the frame fully meets the working conditions of the corresponding market segments, and it has the value of promotion.

Key words: Lightweight; Beam frame; Finite element; Safety factor