主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2022, Vol. 47 ›› Issue (18): 112-115.DOI: 10.16638/j.cnki.1671-7988.2022.018.022

• 测试试验 • 上一篇    

SUV 尾门振动对声腔模态的影响

吴建华 1，程大庆 2，李 扬 2，马思群*1   

  1. 1.大连交通大学 机车车辆工程学院； 2.北京鼎昱晨星技术服务有限公司
  • 出版日期:2022-09-30 发布日期:2022-09-30
  • 通讯作者: 吴建华
  • 作者简介:吴建华（1997—），男，硕士研究生，研究方向为车辆结构分析与现代设计方法，E-mail:13833358823@163.com。 通讯作者：马思群（1969—），男，博士，教授，研究方向为车辆结构分析与现代设计方法，E-mail:251437650@qq.com。

Influence of Rear Door Vibration of SUV Vehicle on Acoustic Cavity Mode

WU Jianhua1 , CHENG Daqing2 , LI Yang2 , MA Siqun*1   

  1. 1.College of Rolling Stock Engineering, Dalian Jiaotong University; 2.Beijing Dingyu Chenxing Technology Service Company Limited
  • Online:2022-09-30 Published:2022-09-30
  • Contact: WU Jianhua

PDF

摘要： 改善由共振而产生的轰鸣噪声一直是车辆噪声、振动与声振粗糙度研究的重要问题。 论文通过对某 SUV 声腔模态和某型号车辆尾门进行模态测试，获得频响函数等数据，对比分 析发现，当外部激励源激励起车内声腔模态时，在 36 Hz 时会激励起尾门的振动，且改善车 内前排声腔区域的低频轰鸣噪声。验证了由声腔内激励车身钣金振动产生的波形相互影响， 可实现车内声腔模态改变，进而达到改善车内声腔的轰鸣噪声的目的。

关键词: 轰鸣噪声；声腔模态；尾门振动；频响函数；SUV

Abstract: Improving the resonant roaring noise is always an important issue in the research of vehicle noise, vibration and harshness. In this paper, the frequency response function and other data were obtained through modal testing of the acoustic cavity mode of an SUV and the rear door of a certain type of vehicle. The comparative analysis found that when the external excitation source excited the internal acoustic cavity mode, the vibration of the rear door would be excited at 36Hz and the low-frequency roaring noise in the front acoustic cavity area of the vehicle would be improved. It is verified that the waveform generated by the vibration of sheet metal of vehicle body excited in the acoustic cavity can affect each other, and the modal change of the acoustic cavity can be realized, so as to improve the roaring noise of the acoustic cavity in the vehicle.

Key words: Roaring noise; Acoustic cavity mode; Rear door vibration; Frequency response function; SUV