| [ 1 ] GERARD B. Application of Thermal Spraying in the
Automobile Industry [J].Surface & Coatings Technology,2006,201(5): 2028-2031.
[ 2 ] 宣天鹏.表面工程技术的选择与设计[M].北京:机械 工业出版社,2011.
[ 3 ] 张燕,张行,刘朝辉,等.热喷涂技术与热喷涂材料的
发展现状[J].装备环境工程,2013,10(3):59-62.
[ 4 ] ZHOU W, ZHOU K, DENG C, et al. Hot Corrosion
Behavior of HVOF-sprayed Cr3C2-WC-NiCoCrMo
Coating[J].Ceramics International,2017(43):9390-9400.
[ 5 ] 吴子健.现代热喷涂技术[M].北京:机械工业出版社,
2018.
[ 6 ] HAN Z, YONG H, HOU G, et al.The Effect of
High-velocity Oxy-fuel Spraying Parameters on
Microstructure, Corrosion and Wear Resistance of Febased Metallic Glass Coatings[J].Journal of NonCrystalline Solids, 2014(406):37-44.
[ 7 ] VIGNESH S, SHANMUGAM K, BALASUBRAMANIAN V, et al. Identifying the Optimal HVOF Spray
Parameters to Attain Minimum Porosity and Maximum Hardness in Iron Based Amorphous Metallic
Coatings [J].Defence Technology,2017(13): 101-110.
[ 8 ] ZHOU Y Y, MA G Z, WANG H D, et al. Fabrication
and Characterization of Supersonic Plasma Sprayed
Fe-based Amorphous Metallic Coatings[J]. Materials
& Design, 2016(110):332-339.
[ 9 ] AN Y, HOU G, CHEN J, et al. Microstructure and
Tribological Properties of Iron-based Metallic Glass
Coatings Prepared by Atmospheric Plasma Spraying
[J].Vacuum,2014(107):132-140.
[10] ZHANG H, XIE Y T, HUANG L P, et al. Effect of
Feedstock Particle Sizes on Wear Resistance of
Plasma Sprayed Fe-based Amorphous Coatings[J].
Surface and Coating Technology,2014(258):495-502. |
