主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2021, Vol. 46 ›› Issue (17): 151-153.DOI: 10.16638/j.cnki.1671-7988.2021.017.043

• 工艺装备 • 上一篇    下一篇

掀背式轿车尾门铰链的车体安装结构设计

付逸群，田 佩   

  1. 安徽江淮汽车集团股份有限公司技术中心
  • 出版日期:2021-09-15 发布日期:2021-09-15
  • 通讯作者: 付逸群
  • 作者简介:付逸群（1989—），男，车身设计工程师，中级工程师， 就职于安徽江淮汽车集团股份有限公司技术中心，研究方向：侧围 结构设计。

The Installation Structure Design of Hatchback Car Tail Door Hinge

FU Yiqun, TIAN Pei   

  1. Anhui Jianghuai Automobile Group Co., Ltd., Technology Center
  • Online:2021-09-15 Published:2021-09-15
  • Contact: FU Yiqun

PDF

摘要： 文章通过设计一种新型的、能满足尾门与顶盖分缝包络外向开启的“小鹅颈式”尾门铰链及其安装点钣金 结构，从而降低尾门分缝处包络对顶盖横梁避让的需求，实现增大顶盖横梁的截面性能，在满足顶盖横梁截面性能 的情况下可最大化轿跑车型的后视野。以某车型为例，阐述在产品设计过程中的结构优化设计方法。

关键词: 掀背式轿车；尾门铰链；安装点；CAE 分析

Abstract: The paper designed a new type of "little goose neck" tailgate hinge and its mounting point sheet metal structure, which can meet the outward opening of the tailgate and top cover slit envelope, the demand for top cover beam avoidance is reduced, and the cross-sectional performance of the top cover beam is increased, and the rear field of view of the coupe model can be maximized if the cross-sectional performance of the top cover cross-section is satisfied. Taking a certain model as an example, this paper expounds the method of structural optimization in the product design process.

Key words: Hatchback car; Tail door hinge; Installation points; CAE analysis