主办：陕西省汽车工程学会
ISSN 1671-7988  CN 61-1394/TH
创刊：1976年
汽车实用技术

汽车实用技术 ›› 2023, Vol. 48 ›› Issue (9): 179-182.DOI: 10.16638/j.cnki.1671-7988.2023.09.035

• 工艺装备 • 上一篇    

汽车底盘随行合装工艺的探讨与应用

高 勇，李智文，刘德志   

  1. 广汽本田汽车有限公司一工厂
  • 出版日期:2023-05-15 发布日期:2023-05-15
  • 通讯作者: 高 勇
  • 作者简介:高勇（1973—），男，硕士，高级工程师，研究方向为汽车制造及生产线规划，E-mail:GAOY@ghac.cn。

Discussion and Application of Automobile Chassis Accompanying Assembly Process

GAO Yong, LI Zhiwen, LIU Dezhi   

  1. GAC Honda Automobile Company Limited NO.1L
  • Online:2023-05-15 Published:2023-05-15
  • Contact: GAO Yong

PDF

摘要： 为解决传统汽车底盘定点合装方式所带来的工艺局限，立足于老旧车间的改造，导入 随行合装设备提高产线作业柔性，提升人员效率。项目组基于“0-FIS”理念，在产量 0 损失 的前提下对总装的底盘合装工艺进行改造规划与工艺革新，以单套随行合装设备替代工序内 运输、升降、移载等设备的功能，实现简化生产设备，削减作业人员的效果，为行业的自动 化改造提供应用经验。

关键词: 汽车底盘；底盘合装；老旧化；“0-FIS”理念

Abstract: In order to solve the process limitations brought by the fixed point assembly method of the traditional automobile chassis, based on the transformation of the old workshop, the accompanying assembly equipment is introduced to improve the flexibility of the production line and improve the personnel efficiency. Based on the concept of "0-FIS", the project team carried out transformation planning and technological innovation on the chassis assembly process of the final assembly on the premise of zero loss of production, and replaced the functions of transportation, lifting, and load transfer equipment in the process with a single set of accompanying assembly equipment, so as to simplify the production equipment, reduce the number of operators, and provide application experience for the automation transformation of the industry.

Key words: Automobile chassis; Chassis assembly; Aging; "0-FIS"concept