关键词: 制动软管；IPS；弯曲半径；松弛度；扭曲度；路径设计

Abstract: Due to the bending characteristics determined by the material, the minimum clearance requirements with surrounding parts on the vehicle, and the extreme motion trajectory of the suspension and steering system, etc., the automobile brake hose may meet dynamic and static interference, excessive involvement, excessive bending fatigue and other problems, which leads to hose wear, fatigue aging, brake fluid leakage, even the risk of brake failure. Through the structure and layout design check of the static end and the moving end of the brake hose based on IPS and three-dimensional software, the transformation of the bending path of the brake hose in the vehicle state to the straight pipe manufacturing of the brake hose in the production state was realized, and the reasonable design of the brake hose path was ensured to avoid the risk of brake failure caused by dynamic and static interference, excessive involvement and excessive bending. This will also form the design process of the brake hose and guide the robust routing design and optimization of the brake hose.

Key words: Brake hose; IPS; Bending radius; Slackness; Torsion resistance; Routing design