| [ 1 ] 问朋朋,黄明宇,倪红军,等.燃料电池车发展概况及
展望[J].电源技术,2012,36(4):596-598,610.
[ 2 ] 樊智鑫,宋珂,章桐.空冷质子交换膜燃料电池性能优
化研究综述[J].汽车技术,2020(4):1-8.
[ 3 ] 张丽,石文荣,梁琦,等.氢气进气压力对空冷 PEMFC
性能的影响[J].化工学报,2023,74(11):4730-4738.
[ 4 ] ZHAO C,XING S,CHEN M,et al.Optimal Design of
Cathode Flow Channel for Air-Cooled PEMFC with
Open Cathode[J].International Journal of Hydrogen
Energy,2020,45(35):17771-17781.
[ 5 ] LEE J,GUNDU M H,LEE N,et al.Innovative Cathode
Flow-Field Design for Passive Air-Cooled Polymer
Electrolyte Membrane (PEM) Fuel Cell Stacks[J].
International Journal of Hydrogen Energy,2019,45(20):
11704-11713.
[ 6 ] BAIK K D,YANG S H.Development of Cathode Cooling Fins with a Multi-Hole Structure for Open-Cathode
Polymer Electrolyte Membrane Fuel Cells[J].Applied
Energy,2020,279:115815.
[ 7 ] BAIK K D,YANG S H.Improving Open-Cathode Polymer Electrolyte Membrane Fuel Cell Performance
Using Multi-Hole Separators[J].International Journal
of Hydrogen Energy,2020,45(15):9004-9009.
[ 8 ] SASMITO A P,BIRGERSSON E,LUM K W,et al.Fan
Selection and Stack Design for Open-Cathode Polymer
Electrolyte Fuel Cell Stacks[J].Renewable Energy,
2012,37(1):325-332.
[ 9 ] SASMITO A P,KURNIA J C,SHAMIM T,et al.Optimization of an Open-Cathode Polymer Electrolyte Fuel
Cells Stack Utilizing Taguchi Method[J].Applied Energy,2016,185(2):1225-1232.
[10] BARBIR F,BOSTON A,LONDON H,et al.PEM Fuel
Cells:Theory and Practice[M].Amsterdam:Elsevier
Academic Press,2005.
[11] VIKALP J,BALAJI K.Modeling the Effect of Rib and
Channel Dimensions on the Performance of High
Temperature Fuel Cells-Parallel Configuration[J].Journal of Electrochemical Science and Engineering,
2020,11(1):59-69.
[12] ZHANG G,XIE S,XIE B,et al.Large-Scale Multi-Phase
Simulation of Proton Exchange Membrane Fuel Cell
[J].International Journal of Heat & Mass Transfer,
2019,130:555-563.
[13] SPIEGEL C,张新丰,张智明.质子交换膜燃料电池建
模与 MATLAB 仿真[M].北京:电子工业出版社,2013.
[14] CHOI K S,KIM B G,PARK K,et al.Flow Control of
Under-Rib Convection Enhancing the Performance of
Proton Exchange Membrane Fuel Cell[J].Computers
& Fluids,2012,69:81-92. |